4G LTE Light Industrial M2M Router
NWL-25

4G LTE Light Industrial M2M Router
NWL-25

The NetComm Wireless 4G LTE Light Industrial M2M Router (NWL-25) is a cost-effective future proof solution that delivers wireless communications to industrial applications. Feature rich and user-friendly, the powerful router enables quick installation and is ideal for M2M and industrial IoT deployments.

Machine-to-Machine (M2M) communications is to industrial automation and management what the internal combustion engine was to the automobile industry. It is revolutionary, and even disruptive, creating new ways to improve productivity and increase profits by enabling the industrial Internet of Things (IoT). Whether you are an end-user, a system integrator or an IoT service manager, your design toolbox will benefit from the simple integration of the 4G LTE Light Industrial M2M Router (NWL-25).

The robust and intelligent NetComm Wireless 4G LTE Light Industrial M2M Router (NWL-25) provides real-time M2M data connectivity, even in harsh environments. The NWL-25 creates reliable point-to-point or point-to-multi-point WAN connections for a variety of mission critical applications such as primary broadband, video surveillance, retail, payments and in-vehicle communications.

Ideal industrial IoT device
The industrial IoT industry is expanding at a rapid rate as businesses realise the enormous value of remote asset management enabled through M2M communications. The NWL-25 has the custom capacity needed to adapt to varied M2M implementations; and is a future proof cost-effective 4G device that ensures a low total cost of ownership and the highest possible rate of return.

Carrier grade management
The NWL-25 supports a wide range of telecommunication standards based remote management protocols such as LWM2M, TR-069 and SNMP to allow quick and easy integration with a wide range of remote device management and application management platforms.

Enterprise grade performance and reliability
The NWL-25 features external antenna connectors for cellular antennas to ensure the best possible high performance 4G connectivity, even in areas with low signal strength. It is a powerful router with advanced networking features for smooth and simple integration within the enterprise’s existing network routing architectures. The device is ideal for business critical applications such as providing high-speed 4G wireless connectivity to substitute fixed-line services.

Powerful edge processor
The NWL-25 is a software rich intelligent 4G router with the additional benefit of being software expandable. It has an open embedded Linux OS, empowering solution architects and system integrators to create their own applications using NetComm Wireless’ Software Development Kit (SDK).

  • Rugged enclosure, multiple wall mount options and a wide range of input power options making it ideal for use in harsh environments
  • Powerful cellular connectivity supporting 4G LTE
  • A serial port software selectable to support either 9 wire RS232 or RS485/RS422
  • 3 x multipurpose I/O pins to connect to external sensors or relays
  • A Fast Ethernet (100Mbps) port to connect to a local device or network
  • USB-OTG for additional interfaces or extra storage
  • Ignition sense capability for graceful shutdown and startup in vehicle applications
  • Configurable power save mode with minimum current draw when in sleep mode
  • Supports PPPoE, RIP, VRRP, DDNS, MAC/NET address filtering and DHCP/DHCP relay
  • VPN support for establishing a secure connection over public cellular networks using: OpenVPN, PPTP, IPSec or GRE Tunnelling
  • Powerful processor and spare storage capacity ideal for applications requiring edge processing

REGISTER YOUR WARRANTY

You must agree to these Terms and Conditions in order to register your warranty. If you cannot agree to these Terms and Conditions, NetComm regrets it cannot register your warranty.


The NetComm Wireless NWL-11 M2M CDMA Router has a standard three (3) year warranty from date of purchase. For all product warranty claims you will require proof of purchase.

1. CONDITIONS AND EXCLUSIONS

1.1 The Product Warranty is granted on the following conditions:

the Product Warranty extends to the original purchaser (you / the customer) and is not transferable;

the Product Warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or with the product;

the customer complies with all of the terms of any relevant agreement with NetComm Wireless and any other reasonable requirements of NetComm Wireless including producing such evidence of purchase as NetComm Wireless may require;

the cost of transporting product to and from NetComm Wireless’ nominated premises is your responsibility;

NetComm does not have any liability or responsibility under this Product Warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm Wireless’ reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour; and

the customer is responsible for the security of their computer and network at all times. Security features may be disabled within the factory default settings. NetComm recommends that you enable these features to enhance your security.

1.2 Product Warranty is automatically voided if:

you, or someone else, use the product, or attempt to use it, other than as specified by NetComm Wireless;

the fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by thunderstorm activity or any other cause(s);

the fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;

your product has been used for any purposes other than that for which it is sold, or in any way other than in strict accordance with the user manual supplied;

your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm Wireless; or

the serial number has been defaced or altered in any way or if the serial number plate has been removed.

2. EXCLUSIONS & LIMITATIONS.

2.1 no other remedies or warranties. Your sole remedy under this end-user warranty is repair or replacement of the affected product. To the extent permitted by applicable law, NetComm Wireless expressly disclaims all warranties, representations or conditions of any kind, express or implied or statutory, written or oral, with respect to the product, including, but not limited to any warranty of non-infringement, merchantable quality or fitness for a particular purpose.

2.2 consequential damages. In no event shall NetComm Wireless, its directors, officers, employees, suppliers and agents, be liable for injury to persons or property, or for any indirect, special, incidental or consequential, punitive or exemplary damages, including loss of profits or revenues, lost or damaged data, failure to realize expected savings, claims against them by third parties, or any other commercial or economic losses of any kind, whether based on contract, tort (including theories of negligence, recklessness, strict liability, or defective product liability) or any other legal theory, even if advised of the possibility of such damages or they are foreseeable, arising out of your use of or inability to use the product.

2.3 maximum liability. The total liability of NetComm Wireless for failure to fulfil its warranty obligations, and of NetComm Wireless, its directors, officers, employees, suppliers and agents, for any other liability under, or in connection with this product, regardless of the number of events, occurrences or claims giving rise to liability, shall be limited to the amount you paid for the product.

2.4 Some jurisdictions do not allow the exclusion of implied warranties and conditions and do not permit the exclusion or limitation of certain damages. Therefore, the exclusions set out in this End-User Warranty may not apply to YOU.

3. GENERAL

3.1 Governing Law & Disputes. All claims or disputes arising under or in connection with this End-User Warranty shall be submitted to arbitration before a single arbitrator under the rules of The American Arbitration Association. The laws of the State of California and the laws of the United States applicable therein shall govern all such claims or disputes (without giving effect to principles of conflicts of laws). The location of the arbitration shall be Los Angeles, California.

3.2 Severability. Any provision of this End-User Warranty which is, or is deemed to be, unenforceable in any jurisdiction shall be severable from this End-User Warranty in that jurisdiction, without in any way invalidating the remaining provisions of this End-User Warranty and any such unenforceability in that jurisdiction shall not make that provision unenforceable in any other jurisdiction.

3.3 Modifications. This End-User Warranty shall not be modified except by a document signed and made part of this Agreement by an authorized signing officer of NetComm Wireless.

3.4 Waiver. A waiver of any right, obligation or default will only be effective if it is in writing and signed by the party against whom the waiver is sought to be enforced. Any particular waiver of any right, obligation or default will not be construed as a waiver of any subsequent or other right, obligation or default. The remedies of each party shall be cumulative and not exclusive.

3.5 Notices. All notices shall be in writing, shall be signed by the party giving notice, and shall be effective on receipt. If a notice duly signed by the party giving notice is transmitted to the other party by facsimile or as a PDF attachment to an e-mail, the facsimile transmission or PDF attachment will be deemed an executed original of the notice and of such signature.

3.6 Assignment. YOU may not assign this Agreement, in whole or in part, without the prior written consent of NetComm Wireless.

3.7 Entire Agreement. This End-User Warranty constitutes the entire agreement between the YOU and NetComm Wireless on the subject matter and supersedes any prior agreement or understanding, written or oral.

NetComm Wireless Limited is an Australian public company with Australian Company Number 002 490 486, with a registered address of Level 2, 18-20 Orion Road, Lane Cove NSW 2066 Australia.



s