Wireless Home AV Connection Kit - NP121


  • Overview
  • Specifications
  • Downloads
Support Find a Retailer

Wireless Home AV Connection Kit

Connect every device to the network in your house with plug and play simplicity. The 2 pre-paired routers transmit a secure and reliable high-speed Wireless N connection throughout your home; and the 4 Ethernet ports at each end support multiple wired connections. With advanced security features your network will remain secure from unauthorised outside sources ensuring the best possible performance is always achievable.
NP121
NP121

Two ready-to-go wireless.

The 2 pre-paired wireless routers enable the simplest possible setup of a reliable wireless network connection so you can enjoy instant wireless connectivity without having to install a new Internet connection point or run a cable across the floor.

Instant WiFi.

Ideal for high-definition media streaming and large file downloads, the Kit features Wireless N speeds reaching 300Mbps to deliver the highest possible data transmission speeds and simultaneous multi-device connectivity without compromising performance.  
NP121
NP121

End-to-end Ethernet.

With 4 Ethernet ports at each end you can maximise the potential of your Internet connection by connecting multiple wired devices such as Internet-enabled TVs, Blu-ray players, gaming consoles, personal video recorders and digital set top boxes.
 

Technical Specifications

HARDWARE

  • MCU – RT3052, 384MHz embedded RF/MAC/BBP
  • Memory– 32MB SDRAM
  • Flash: 4MB
Physical Interface 
  • Four x 10/100 Fast Ethernet RJ-45 LAN, Power Jack
  • WPS (Wi-Fi Protected Setup) /Reset button
  • Power Supply: 12V/1A

SOFTWARE FEATURES

  • Topology: Infrastructure
  • Operation Mode: AP/Client Bridge/ AP Repeater
LAN
  • DHCP Server
  • Static Routing Table
Wireless 
  • 64/128 bit WEP Encryption
  • WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
  • Wi-Fi Protection Setup (WPS)
  • 2 Transmitting and Receiving antennas
  • 802.11n compliant
  • Data rate: up to 300Mbps
Management 
  • Configuration: Web-based configuration (HTTP)
  • Firmware Upgrade: Upgrade firmware via web-browser
  • Administrator Setting: Administrator password change Idle time out
  • Reset Setting: Reset to Factory Default
  • Bandwidth monitoring

ENVIRONMENT & PHYSICAL

  • Temperature Range:  0 to 45° C - Operating, -10 to 70 ° C - Storage
  • Humidity (non-condensing): 15%-95% typical
  • Dimensions: 135mm (L) x 110mm (W) x 39mm (H)
Specifications are subject to change without notice

Downloads

Documentation

Images


Hi-Res - JPG
Lo-Res - JPG

Hi-Res - JPG
Lo-Res - JPG

Hi-Res - JPG
Lo-Res - JPG

Hi-Res - JPG
Lo-Res - JPG

Hi-Res - JPG
Lo-Res - JPG

Firmware

Drivers/Utilities

There are no drivers available for this product.

Available in selected regions.